Qmk Firmware Versions Save

This firmware is the beginning of ARM support, and it is not compatible with rev 1-5, and rev 1-5 firmware is not compatible with it - please do not attempt to flash either.

This is for the first Massdrop run, shipping in 2018.

Known issues:

• Fn key mistakenly activates col 0 via E6, triggering KC_ESC, KC_TAB, KC_LSHFT

• Uses QMK Bootloader
  • Press ESC to exit
  • Beeps/blinks when in the bootloader
• Backlight key turns off status LED when depressed for easier debugging
• Home/End/PGUP/PGDN keys add
• Debug key add
• Terminal keys added (disabled by default)

• Uses QMK Bootloader
  • Press ESC to exit
  • Beeps/blinks when in the bootloader
• Backlight key turns off status LED when depressed for easier debugging

Has the following options:

BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
CONSOLE_ENABLE = yes         # Console for debug(+400)
COMMAND_ENABLE = no        # Commands for debug and configuration
NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
MIDI_ENABLE = yes            # MIDI controls
AUDIO_ENABLE = yes           # Audio output on port C6
UNICODE_ENABLE = no         # Unicode
BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no

Same hardware as 4.0, but updated firmware. Keymap has not changed.

Boards features speaker, and the audio is enabled by default.

Board features speaker, and the audio is enabled by default.

Known issues:

• Planck Plover layer sound doesn't play all the way - fixed at 9ab7098