Landlock Make Save

Sandboxing for GNU Make has never been easier

Project README

Landlock Make

Landlock Make is a GNU Make fork that sandboxes command invocations automatically based on your build rule config. This tool can:

  1. Restrict filesystem access to target and prerequisites only
  2. Prevent public internet access
  3. Enforce resource quotas

This demo repository contains binary releases. It's intended to show how Landlock Make can be configured. It also includes a comparable Bazel configuration, in order to demonstrate that our sandboxing solution goes 5x faster. You can get started as follows:

Table of Contents

Getting Started

To get started, run:

git clone https://github.com/jart/landlock-make
cd landlock-make
build/bootstrap/make.com -j8

If you wish to build this project from source, you may do so as follows:

git clone https://github.com/jart/cosmopolitan
cd cosmopolitan
make -j8 o//third_party/make/make.com

Release artifacts are also available at https://justine.lol/make/.

Reference

This reference covers features added in our Landlock Make fork. Please see https://justine.lol/dox/make.txt for the GNU Make documentation.

Theory

Landlock LSM operates on inodes. This means:

  1. A file needs to exist to be unveiled
  2. A path becomes veiled again if it's unlinked

This makes the output filenames tricky, since Landlock Make needs to touch your target's output file before it runs the command.

This makes Make easier to use in many cases. For example, large projects usually use a separate build/... output directory tree, and it's cumbersome to have to put a @$(MKDIR) $(@D) command in every build rule. Thanks to Landlock Make, that's now automated.

Where Landlock gets tricky is because of (2). Some tools, e.g. GCC, will do things like unlink() an output file if it exists, specifically to create a new inode. For tools ilke that we suggest a workaround like:

o//%.o: %.c
	@/bin/echo $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
	@$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $(TMPDIR)/$(subst /,_,$@)
	@/bin/mkdir -p $(@D)
	@/bin/cp -f $(TMPDIR)/$(subst /,_,$@) $@

This will ensure the inode isn't destroyed, since the output is being written to a temporary directory and then copied over the output when it's done. The above code is designed to be portable. That definition will work with Landlock Make as well as vanilla GNU Make. Since Landlock Make automatically sets up and tears down unique $(TMPDIR) directories per build rule, you could actually write the following without compromising your ability to use the -j flag:

o//%.o: %.c
	@/bin/echo $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
	@$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $(TMPDIR)/o
	@/bin/cp -f $(TMPDIR)/o $@

CLI Flags

Landlock Make introduces the following command line flags:

  • --strace causes system calls to be logged to standard error.

  • --ftrace causes function calls to be logged to standard error.

Variables

Can be used to keep temporary directory names smaller, while preserving backwards compatibility with GNU Make.

.STRICT = BOOL

Enables Landlock Make.

Setting this variable in the global scope will cause Landlock Make's sandboxing to become enabled. Otherwise, the default behavior is to be backwards compatible with normal GNU Make.

Valid truth values are 1 or true case insensitively. Other values are false.

.UNVEIL = [rwcx:]PATH

Specifies which files and directories are visible.

Commands, targets, and prerequisites are unveiled automatically. This variable is mostly needed to do things like whitelist your toolchain or dynamic shared objects, e.g.

.STRICT = 1
.UNVEIL =			\
	rx:/lib			\
	rx:/usr/lib		\
	rx:toolchain

Permissions precede your path, followed by a colon. Possible permissions are r (read), w (write), c (create), and x (execute). If no permissions are specified, the default is read-only.

This variable may be specified on a build target, the pattern rule, and the global scope. If paths are specified in multiple places, they will aggregate. For example, you might want to allow a unit test to access certain system files, while still keeping it restricted globally.

o//third_party/python/Lib/test/test_wsgiref.py.runs: 			\
		private .UNVEIL +=					\
			/etc/mime.types					\
			/etc/httpd/mime.types				\
			/etc/httpd/conf/mime.types			\
			/etc/apache/mime.types				\
			/etc/apache2/mime.types				\
			/usr/local/etc/httpd/conf/mime.types		\
			/usr/local/lib/netscape/mime.types		\
			/usr/local/etc/httpd/conf/mime.types		\
			/usr/local/etc/mime.types

It's important to use the private keyword when specifying variables on targets, since otherwise Make will backpropagate your variable to the prerequisites of your target.

Paths that don't exist are ignored.

.PLEDGE = PROMISES...

Specifies which system calls are used by build commands.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

Valid tokens are stdio, rpath, wpath, cpath, dpath, flock, tty, recvfd, sendfd, fattr, chown, inet, unix, id, dns, proc, exec, prot_exec, vminfo, tmppath. See the documentation at cosmopolitan/libc/calls/pledge.c to learn more about which system calls each categories will authorize.

If the inet or dns groups are enabled, then you'll only be able to speak with private subnets unless .INTERNET = 1 is specified too.

.INTERNET = BOOL

Enables build commands to talk to the Internet.

By default, we only allow socket system calls to use the subnets 127.0.0.0/8, 10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16. If any subprocess tries to speak to the public Internet, then a message will be logged to stderr and the system call will return ENOSYS.

On Linux this is accomplished by installing a SECCOMP ptrace() monitor process for each command. That's only possible if the process isn't already being traced by a parent make (or a tool like GDB and strace). Root access is not required.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

Valid truth values are 1 or true case insensitively. Other values are false.

Please consider using .PLEDGE, because if it's specified, and the specification doesn't include inet or dns, then Landlock Make won't need to spawn monitor processes, which is more efficient, since pledge() will block the socket system calls in pure in-kernel BPF code.

.UNSANDBOXED = BOOL

Disables pledge() and unveil().

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

Valid truth values are 1 or true case insensitively. Other values are false.

TMPDIR

Defines temporary file root.

If this variable is defined, then Landlock Make will automatically setup and teardown a unique temporary subdirectory per build rule invocation. For example, if you specify:

TMPDIR = o//tmp

o//foo.o: foo.c
	@/bin/echo $(CC) -c $< -o $@
	@$(CC) -c $< -o $(TMPDIR)/$(subst /,_,$@)
	@/bin/cp -f $(TMPDIR)/$(subst /,_,$@) $@

Then $(TMPDIR) will look like /project/o//tmp/o__foo.huoehg. The new $(TMPDIR) can be referenced in your shell code. It will also be exported to subprocesses as the $TMPDIR environment variable.

Parent directories are created automatically. The unique subdirectory is recursively deleted when your build rule commands terminate. If you have multiple command lines in your build rule, then your temporary directory will be shared between them. It won't be shared with anything else.

.CPU = SECONDS

Sets CPU resource limit.

This specifies the amount of CPU time, in seconds, that each individual command is allowed to take.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

If this limit is violated, then a SIGXCPU signal is sent to your program, after which it has precisely one second to gratefully shutdown before SIGKILL is used.

.MEMORY = SIZE

Sets virtual memory space limit.

The size is specified in bytes. It may use Si notation, e.g. 64kb for 64 kibibytes, 1G for a gibibyte, etc. Units use base 1024. This size may also be specified as a percent value, e.g. 10% which will be computed as ten percent of the amount of physical RAM available on the host machine.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

When this limit is violated, mmap() will begin returning ENOMEM which will trickle down into functions like malloc() failing.

.RSS = SIZE

This is the same as .MEMORY but takes the resident set size into consideration, rather than the virtual address space size. This limit is more useful if you make heavy use of overcommit memory or have sparse data structures.

.FSIZE = SIZE

Sets individual file size limit.

This specifies how big files can grow. It applies on a per file basis.

The size is specified in bytes. It may use Si notation, e.g. 64kb for 64 kilobytes, 1G for a gigabyte, etc. Units use base 1000.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

If this limit is violated, then a SIGXFSZ signal will be delivered to the process responsible. If the limit is exceeded by 150%, then a SIGKILL signal is used to kill the process.

.NPROC = COUNT

Specifies maximum number of forked and cloned processes for user.

This variable may be used to reduce the likelihood of a fork() bomb destroying your system.

Since this value applies across the entire logged-in UNIX user account, you may already be running a thousand or so processes. In that case, you can still safely specify a lower limit, becasue the count of preexisting processes will be implicitly added to whichever count you specify.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

If this limit is violated, functions like fork() will start returning EAGAIN.

.NOFILE = COUNT

Specifies maximum number of forked and cloned processes for user.

This variable may be used to reduce the likelihood of a fork() bomb destroying your system.

Since this value applies across the entire logged-in UNIX user account, you may already be running a thousand or so processes. In that case, you can still safely specify a lower limit, becasue the count of preexisting processes will be implicitly added to whichever count you specify.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

If this limit is violated, functions like open() will start returning EMFILE.

.MAXCORE = SIZE

Specifies maximum size of a core dump file on job processes.

Usually the default is zero, which means to not create core dumps. If you want core dumps, then setting this to -1 will allow core dumps of any size. Since a core dump for an OOM'd process can take a very long time to write to disk, you may want to choose a more conservative limit.

This variable may be specified on a build target, a pattern rule, or the global scope (by order of precedence).

LANDLOCKMAKE_VERSION

Contains semantic version of Landlock Make. This was first introduced in version 1.4. For example:

ifeq ($(LANDLOCKMAKE_VERSION),)
TMPSAFE = $(TMPDIR)/$(subst /,_,$@)
else
TMPSAFE = $(TMPDIR)/
endif

Functions

Landlock Make offers the following builtin functions.

$(uniq list)

Removes duplicate words in list while preserving ordering. The output is a list of words separated by single spaces. Thus,

$(call uniq,foo bar foo lose)

returns the value:

foo bar lose

To preserve backwards compatibility with GNU Make, you can test for its existence and then fall back to defining a quadratic implemention using functional programming:

ifneq ($(call uniq,c b c a),c b a)
uniq = $(if $1,$(firstword $1) $(call uniq,$(filter-out $(firstword $1),$1)))
endif

Pledged Paths

If you use the .PLEDGE feature then certain paths will be unveiled automatically, based on your list of promises.

If tmppath is pledged:

  • /tmp with rwc permissions

If rpath is pledged:

  • /proc/filesystems with r permissions

If inet is pledged:

  • /etc/ssl/certs/ca-certificates.crt with r permissions

If dns is pledged:

  • /etc/hosts with r permissions
  • /etc/hostname with r permissions
  • /etc/services with r permissions
  • /etc/protocols with r permissions
  • /etc/resolv.conf with r permissions

If tty is pledged:

  • tyname(0), wit rw permissions
  • /dev/tty with rw permissions
  • /dev/console with rw permissions
  • /etc/terminfo with r permissions
  • /usr/lib/terminfo with r permissions
  • /usr/share/terminfo with r permissions

If vminfo is pledged:

  • /proc/stat with r permissions
  • /proc/meminfo with r permissions
  • /proc/cpuinfo with r permissions
  • /proc/diskstats with r permissions
  • /proc/self/maps with r permissions
  • /sys/devices/system/cpu with r permissions
Open Source Agenda is not affiliated with "Landlock Make" Project. README Source: jart/landlock-make
Stars
210
Open Issues
0
Last Commit
1 year ago
Repository

Open Source Agenda Badge

Open Source Agenda Rating