Erlyberly Save

erlang tracing for the masses

Project README

erlyberly is looking for contributors, especially if you would like to code java. Have a look at the issues or ping me at


Build Status

erlyberly is a debugger for erlang, elixir and LFE using erlang tracing. It is probably the easiest and quickest way to start debugging your nodes.

If you are using io:format/2 or lager for debugging then erlyberly can save you time. Tracing requires no code changes and no recompliation to see function calls and results. erlyberly makes debugging smoother by reapplying traces when modules are reloaded and when the node restarts.

Quick start

A one liner to go from zero to erlyberly user. You will need erlc (erlang compiler) on the path and JDK 8u20 or higher installed to run erlyberly, download it here, see instructions for command line java installs for some operating systems here. More compile instructions are in the wiki page

git clone && cd erlyberly && ./mvnw clean compile install assembly:single && java -jar target/*runnable.jar

If you already have erlyberly and want to update to have the latest features, run the following from the erlyberly project directory.

git pull origin && ./mvnw clean compile install assembly:single && java -jar target/*runnable.jar

To create a development environment, follow the three steps in the wiki.

Please raise an issue if you are unable to build that includes the OS, java version and erlang versions.

Features and How To

Set traces on functions

All the modules loaded by the VM appear in the module tree. Expand one of modules to view the functions, double clicking the star toggles tracing on and off. Any calls made to that function by any process will now be shown in the right hand list. Press ctrl+t while a function is selected to toggle a trace without touching your mouse.

you cannot see the beautiful screen shot

Right click on a module and then click Module Trace to put a trace on all functions displayed under the module. If some functions are not displayed because of a filter, the trace will not be applied.

See calls to functions and their results

Double click on a trace to see a breakdown of the arguments and results of the function call.

you cannot see the beautiful screen shot

See calls that threw exceptions

Exceptions are highlighted.

you cannot see the beautiful screen shot

See incomplete calls

A call that hasn't returned yet is highlighted in yellow.

Sequential Tracing of messages

Sequential Tracing (seq_trace) is message tracing from process to process, allowing you to see the message flow through the application.

you cannot see the beautiful screen shot

To start a seq trace right click on a function and select Seq Trace (experimental), a Window will pop up that will display the trace messages. When the traced function is called, messages sent afterwards are shown in the window.

This functionality is experimental and highly likely to bork the remote node under test and erlyberly. Once a seq trace is set the only way to stop it is to terminate erlyberly or run seq_trace:reset_trace() in the shell of the remote node.

Get the process state

Get and display the state of a process.

you cannot see the beautiful screen shot

This uses sys:get_state/1 under the hood and so has the same limitations. Processes that do not support the system message may not respond.

If the value is a record that is compiled into the module of the processes initial call then the record name and field names will appear highlighted. Records that are not known by the module at compile time will not be highlighted.

Attach to any running system

erlyberly connects as an erlang node to the node you want to trace. Once connected it can trace your application code, 3rd party modules and modules that are part of the erlang standard libary.

Just make sure that the runtime_tools application is available in the code path. If the node was run using erl directly then it will be available by default.

erlyberly is not meant to trace production systems. There is no overload protection as per redbug.


Easily find what you're looking for by using the filter fields.

Filter What is searched?
processes pid and registered name
modules & functions modules, functions can be filtered using a colon i.e. my_module:my_func
trace logs All text shown in the trace

The process and trace filters support or and not filters, module filtering does not support this. By entering !io in the trace filter, all traces containing the text io will be hidden, by entering lists|proplists only traces containing the text lists or proplists will be shown.

If the filter is empty then all data is shown.

Show functions that are currently traced by setting #t as the function filter.

Trace between restarts

When the target node VM gets restarted, erlyberly tries to reconnect and reapply the traces you had previously set. This is great for your dev workflow. Make a change, restart and your traces will be there waiting for you to retest.

If you hotload code during development either manually or using a reloader like sync then you may notice that reloading a module removes all traces on it. erlyberly listens for modules being reloaded and reapplies any traces that were previously applied to it, without interrupting you!

See graphs for process memory usage

Open up the process table, next to the memory usage columns there is a pie chart icon. Clicking one of these icons shows the memory usage of all the processes that were selected in the table.

you cannot see the beautiful screen shot

View the source code for modules and functions

View the source code for a module by right clicking on a module and selecting View Source Code. If a function is selected then only source for that function will be shown.

you cannot see the beautiful screen shot

The source code that is shown by erlyberly is decompiled from the beam file, not what was actually compiled so comments and code that was excluded with an ifdef will be ommitted.

View the abstract source code for modules and functions

View the abstract source code for a module by right clicking on a module or function and selecting View Abstract Code. The beam file for the module must exist and it must have been compiled with +debug_info or the source code will not

you cannot see the beautiful screen shot

Abstract code is an erlang term representation of a beam file. You can use it to see how a module is compiled. One use case is to make sure that variables that you think will made constants in the beam code do actually get compiled that way.

View the call graph for a function

See what functions another function calls by right clicking on it and clicking View Call Graph. This is helpful to understand dependencies of functions.

you cannot see the beautiful screen shot

The View Call Graph option is disabled until the you have clicked the `xref Analysis' button at the top of the window and it shows ok in green. This is because xref must analyse all of the modules loaded by the VM which can take a while. You may see xref output in the console while xref performs analysis.

Traces can be applied to all functions in a call graph by right clicking and selecting Recursive Trace. Traces will be applied recursively to all functions by the selected function in the graph. This can be used to find a function that is throwing an exception when a stack trace is not available. The function throwing the exception will appear in the trace list in red.

Get notified of crash reports

When an OTP process dies it generates a crash report which is typically logged to a file by lager or sasl. Erlyberly acts as another crash report handler and displays the number of crash reports in red, next to the Crash Report button.

you cannot see the beautiful screen shot

Click the button to view the crash reports and clear the notifications displayed in the button. Double click on them to view in more detail.

Cross platform

Tested on OSX, Linux Ubuntu, RHEL and CentOS.


On OSX all shortcuts use cmd instead of ctrl.

Keys Action
escape Close sub windows.
ctrl+f Focus on the last focused filter field, or the next if one is already focused.
ctrl+m Toggle visibility of modules and functions.
ctrl+n Clear trace logs
ctrl+p Toggle visibility of processes.
ctrl+t Toggle tracing for the selected function in the module tree.
ctrl+shift+t Press in the module/function filter field to apply traces to all functions that have not been filtered.

Trouble Shooting

Cannot connect or Name server errors on connection

erlyberly must have epmd running on the machine as it is running. Otherwise it will not be able to connect to the remote node with an error about Name Servers. The easiest way to run epmd is to run the following command in the shell erl -sname hi, this requires erlang to be installed and on the PATH.

This can also happen if erls -name parameter is used but without a hostname, see #108. For example.

erl -name mynode

The fix is to specify the hostname or user -sname.

erl -name [email protected]
Cannot start, NoSuchMethodException is thrown

This happens when java version 8 is installed but the update is less than 20. Please update your version of java. See issue #39.


Some things that are important.

  1. Bug fixing and stability for current features is number one priority right now. Help by contributing issue reports.
  2. Improved elixir support.
  3. Better seq_trace support.
  4. Beat CAP.

erlyberly is meant to be a complementary to observer so there will be no attempt to implement features such as the supervisor hierarchy graph.

Special Thanks

The following people have contributed code to erlyberly:

The hex editor originated from hexstar. The stack trace parsing is taken from redbug. Fun decompiling is from saleyn/util. Tab pane drag to window is from shichimifx.

Open Source Agenda is not affiliated with "Erlyberly" Project. README Source: andytill/erlyberly
Open Issues
Last Commit
2 years ago

Open Source Agenda Badge

Open Source Agenda Rating