Adalanche Open Source

Active Directory ACL Visualizer and Explorer

Adalanche gives instant results, showing you what permissions users and groups have in an Active Directory. It is useful for visualizing and exploring who can take over accounts, machines or the entire domain, and can be used to find and show misconfigurations.

I Can Haz Domain Admin?

Active Directory security is notoriously difficult. Small organizations generally have no idea what they're doing, and way too many people are just added to Domain Admins. In large organizations you have a huge number of people with different needs, and they are delegated access to varying degrees of power in the AD. At some point in time, someone makes a mistake, and that can cost you dearly.

Get Adalanche

Adalanche is an all-in-one binary - it collects information from Active Directory or from local Windows machines and can the analyze the collected data. If you're only doing AD analysis, just grab the binary for your preferred platform. Later you can deploy the dedicated collector .exe for your Windows member machines via a GPO or other orchestration and get even more insight.

You have three options to get Adalanche up and running on your system:

Download

Download either the latest release or recent development build. Usually running with the latest development build is fine, but there might be a problem here and there. Releases are considered stable and are for the less adventurous.

Build it yourself

If you prefer full control, you can roll your own on any supported platform (Windows, MacOS, Linux):

• Prerequisites: Go 1.21, PowerShell 7, git
• git clone https://github.com/lkarlslund/Adalanche Adalanche
• cd Adalanche
• ./build.ps1

Resulting binaries are available in the 'binaries' subfolder.

Purchase signed and validated binaries

You can also purchase a commercial version of Adalanche from NetSection which is a signed binary on the Windows platform.

Get some results

You can either use some sample data to just play around, or you can collect data from a real Active Directory domain.

Run with sample data

If you're not keen on running foreign tools against your Active Directory, there are sample data available in this repository.

Easy mode / full auto

If you're running Adalanche on a Windows domain joined machine should just work without any parameters, as Adalanche tries to autodetect as much as it can. Under this scenario, and with parameters given, you will run in a collect-analyze mode (collect from Active Directory, then analyze).

For more advanced use (recommended) first collect, with proper options. All your data files (are belong to us), and will end up in the data subfolder (or use --datapath dir to use an alternative folder).

See program options for other possibilities (help or command --help).

Collecting data from Active Directory

The primary source of data is from Active Directory, and is intiated with this command:

adalanche collect activedirectory [--options ...]

Windows versions of Adalanche will default to using the native Windows LDAP library to connect to Active Directory, while non Windows version will use the multiplatform LDAP library. You can force Adalanche on Windows to use the multiplatform library with the --nativeldap=false option - this allows you to use a hash as a password and also to use a kerberos cache file for authentication.

Feature	Windows LDAP	Multiplatform LDAP
Unauthenticated bind	Yes	Yes
Simple bind	Yes	Yes
Digest bind	Yes	Yes
Kerberos	Yes, via NEGOTIATE	Yes (cache file)
NTLM	Yes	Yes
NTLM (hash)	No	Yes

If you're on a non-domain joined Windows machine or another OS, you'll need at least the --domain parameter, as well as username and password (you'll be prompted for password if Adalanche needs it and you didn't provide it on command line - beware of SysMon or other command line logging tools that might capture your password).

LDAP (unencrypted port 389) is default. You can switch to TLS (port 636) with --tlsmode tls option.

Example to create data files file for contoso.local coming from your Linux pwnage box using TLS port 636, ignoring certs and using NTLM auth:

adalanche collect activedirectory --tlsmode tls --ignorecert --domain contoso.local --authdomain CONTOSO --username joe --password Hunter42

From domain joined Windows member using current user:

adalanche collect activedirectory

From domain joined Windows machine using other credentials than logged in:

adalanche collect activedirectory --authmode ntlm --username joe --password Hunter42

There are more options available, for instance on what LDAP contexts to collect, whether to collect GPOs or not etc. Please be aware that you can collect GPOs from Linux by mounting sysvol locally and pointing Adalanche to this path for GPO collection - but you will lose ACL analysis for the individual files.

LDAP RESULT CODE 49

• Wrong credentials (username/password) "LDAP Result Code 49 "Invalid Credentials": 8009030C: LdapErr: DSID-0C0906B5, comment: AcceptSecurityContext error, data 52e, v4563" You've entered wrong credentials or the account is blocked.

• Channel binding requirements "LDAP Result Code 49 "Invalid Credentials": 80090346: LdapErr: DSID-0C0906B5, comment: AcceptSecurityContext error, data 80090346, v4563" This is a "Channel Binding" requirement for SSL enabled connections over LDAP, as part of Microsofts hardening efforts on making LDAP more secure. This is currently unsupported by Adalanche on non Windows platforms due to LDAP library limitations - try running the collection from a Windows machine.

Dump data using SysInternals AD Explorer

The SysInternals AD Explorer (adexplorer64.exe) is an enhanced GUI application that allows you to poke around in all objects and see all attributes. It also leverages the Windows LDAP library (just like Users & Computers etc.), and might be an option if you're not allowed to run Adalanche directly due to security concerns. By utilizing the "snapshot" feature, it allows you do dump the entire AD into a proprietary file, which Adalanche can ingest as an alternative to talking directly to LDAP.

The procedure for using AD Explorer as a data source is:

• Launch 'adexplorer64.exe'
• Connect to your domain, for simple setups you can just leave all fields blank and press connect
• Choose File | Create snapshot ... and save the file somewhere. There is no progress indicator, so just have patience
• Run Adalanche to collect Active Directory object and GPO data: adalanche collect activedirectory --adexplorerfile=yoursavedfile.bin

If you can't reach GPOs from where you're importing, you can either disable GPO imports --gpos=false or copy the Group Policy folder from SYSVOL and point to that with --gpopath=your-copied-GPO-folder, but you'll lose ACL analysis for the individual GPO files.

You will then have compressed AD data (and potentially GPO data) in your datapath like a normal collection run. You can delete the AD Explorer data file now, as this is converted into Adalanche native format, and you can now run analysis mode.

Gathering Local Machine data (Windows)

For Windows systems that are members of your Active Directory domain (or standalone) you can collect more information from the local machines by running the collector module. There is a stand alone version released as a 32-bit Windows executable, and this works transparently also on 64-bit systems. The idea is that you orchestrate it centraliy with a Scheduled Task via a GPO or whatever means you see fit (psexec, login script etc).

The collector does not require elevated privileges, and runs fine with either the local system account with pricileges stripped or as a random user.

adalanche-collector --outputpath \\some\share\where\youcanwrite\butnotread

You can run the local machine collector from the Adalanche binary too, but this is only included in the 64-bit Windows build:

adalanche collect localmachine [--options ...]

Please remember to secure your collection repository UNC path, so member machines can only create/write/modify files, but not read from them. Only you - the analyst - should be able to do so.

The files will automatically be imported into Adalanche when you run it, if they're part of your datapath (in a subfolder or just copied in - whatever works for you)

This will give you insight into who uses what systems, service accounts that are domain users, autoadminlogins, who are local admins, who can RDP into systems and more fun stuff later on :-)

Analysis

This is dead simple - everything you've collected should be in the data directory, either in the main folder or in subfolders.

Whatever resides there and Adalanche understands is automatically loaded, correlated and used. It's totally magic.

IMPORTANT: If you're doing multi domain analysis, place all AD object and GPO files for each domain in their own subfolder, so Adalanche can figure out what to merge and what NOT to merge. When dumping just point to a new --datapath for collection run (example: adalanche collect activedirectory --datapath=data/domain1 --domain=domain1)

These extensions are recognized:

• .localmachine.json - Windows collector data
• .gpodata.json - Active Directory GPO data
• .objects.msgp.lz4 - Active Directory object/schema data in MsgPack format (LZ4 compressed)

Highly advanced command line to analyze and launch your browser:

adalanche analyze

There are some options here as well - try adalanche analyze --help

User Interface

When launched, you'll see some statistics on what's loaded into memory and how many edges are detected between objects. Don't worry, Adalanche can handle millions of objects and edges, if you have enough RAM ;)

The pre-loaded query allows you to see who can pwn "Administrators", "Domain Admins" and "Enterprise Admins". Query target nodes are marked with RED.

Press the "analyze" button in the query interface to get the results displayed. If you get a lot of objects on this one, congratz, you're running a pwnshop.

Depending on whether you're over or underwhelmed by the results, you can do adjustments or other searches.

Pre-defined searches

To ease the learning experience, there are a number of sample queries built into Adalanche. You access these by pressing the "Sample queries" button, and choosing one. This should give you some idea of how to do queries.

Analysis Options

Query direction:

• In "incoming" mode you select target nodes, and Adalanche figures out who can reach these target nodes (most common search)
• In "outgoing" mode you select target nodes, and Adalanche figures out what impact they have (like what can "Domain Users" do?)

If your query returns more than 2500 objects (default), Adalanche will limit the output and give you the results that fit within the limit. This limitation is because it has the potential to crash your browser, and is not an Adalanche restriction - feel free to adjust as needed.

Remember, you might get too many results. Limit the selection of target nodes with (&(attribute=something)(_limit<10)) to just get the first 10 target nodes (see LDAP queries below)

The "Prune island nodes" option removes nodes that have no edges from the results.

Analysis depth allows you do limit how many edges from the target selection is returned. Setting this to 0 will only result in the query targets (don't prune islands here, otherwise you'll get nothing), setting it to 1 results on only neighbouring edges to be returned. Quite useful if you get too much data back, blank is no restrictions.

Max outgoing edges limits how many outgoing edges are allowed from an object, and can help limit results for groups and objects that have many assignments. Adalanche tries it best to limit this in a logical way.

Each edge has a probability of success, and you can limit the graph by choosing the minimum probability per edge or overall/accumulated probability of current edge.

Edges

Press the "Edges" tab to allow you to do edge based filtering.

FML is not the usual abbreviation, but represents First, Middle and Last. Disabling the "Middle" selector, will also prevent "Last" in the results, unless it's picked up as the "First" due to the way the search is done.

Nodes

This works the same way as the "Edges" limiter above.

LDAP query pop-out

When you press the "LDAP Query" tab on the bottom portion of the page, and you get the search interface:

You enter a query for things you want to search for, with the "start query" setting your targets. Optionally you can also add a secondary query the following nodes must match. If you put a filter in the "end query" then nodes not matching this will be removed from the outer objects (end of graph).

Operational theory

Adalanche works a bit differently than other tools, as it dumps everything it can from an Active Directory server, which it then saves to a highly compressed binary cache files for later use. This dump can be done by any unprivileged user, unless the Active Directory has been hardened to prevent this (rare).

If you collect GPOs I recommend using a Domain Admin account, as GPOs are often restricted to apply only to certain computers, and regular users can't read the files. This will limit the results that could have been gathered from GPOs.

The analysis phase is done on all collected data files, so you do not have to be connected to the systems when doing analysis. This way you can explore different scenarios, and ask questions not easily answered otherwise.

Analysis / Visualization

The tool works like an interactive map in your browser, and defaults to a ldap search query that shows you how to become "Domain Admin" or "Enterprise Admin" (i.e. member of said group or takeover of an account which is either a direct or indirect member of these groups).

LDAP queries

The tool has its own LDAP query parser, and makes it easy to search for other objects to take over, by using a familiar search language.

The queries support:

• case insensitive matching for all attribute names
• checking whether an attribute exists using asterisk syntax (member=*)
• case insensitive matching for string values using equality (=)
• integer comparison using <, <=, > and >= operators
• glob search using equality if search value includes ? or *
• case sensitive regexp search using equality if search value is enclosed in forward slashes: (name=/^Sir.*Mix.*lot$/ (can be made case insensitive with /(?i)pattern/ flags, see https://github.com/google/re2/wiki/Syntax)
• extensible match: 1.2.840.113556.1.4.803 (you can also use :and:) LDAP_MATCHING_RULE_BIT_AND
• extensible match: 1.2.840.113556.1.4.804 (you can also use :or:) LDAP_MATCHING_RULE_BIT_OR
• extensible match: 1.2.840.113556.1.4.1941 (you can also use :dnchain:) LDAP_MATCHING_RULE_IN_CHAIN
• custom extensible match: count - returns number of attribute values (member:count:>20 gives groups with more members than 20)
• custom extensible match: length - matches on length of attribute values (name:length:>20 gives you objects with long names)
• custom extensible match: since - parses the attribute as a timestamp and your value as a duration - pwdLastSet:since:<-6Y5M4D3h2m1s (pawLastSet is less than the time 6 years, 5 months, 4 days, 3 hours, 2 minutes and 1 second ago - or just pass an integer that represents seconds directly)
• synthetic attribute: _limit (_limit=10) returns true on the first 10 hits, false on the rest giving you a max output of 10 items
• synthetic attribute: _random100 (_random100<10) allows you to return a random percentage of results (&(type=Person)(_random100<1)) gives you 1% of users
• synthetic attribute: out - allows you to select objects based on what they can pwn directly (&(type=Group)(_canpwn=ResetPassword)) gives you all groups that are assigned the reset password right
• synthetic attribute: in - allows you to select objects based on how they can be pwned directly (&(type=Person)(_pwnable=ResetPassword)) gives you all users that can have their password reset
• glob matching on the attribute name - searching for (*name=something) is possible - also just * to search all attributes
• custom extensible match: timediff - allows you to search for accounts not in use or password changes relative to other attributes - e.g. lastLogonTimestamp:timediff(pwdLastSet):>6M finds all objects where the lastLogonTimestamp is 6 months or more recent than pwdLastSet
• custom extensible match: caseExactMatch - switches text searches (exact, glob) to case sensitive mode

Detectors and what they mean

This list is not exhaustive.

Detector	Explanation
ACLContainsDeny	This flag simply indicates that the ACL contains a deny entry, possibly making other detections false positives. You can check effective permissions directly on the AD with the Security tab
AddMember	The entity can change members to the group via the Member attribute
AddMemberGroupAttr	The entity can change members to the group via the Member attribute (the set also contains the Is-Member-of-DL attribute, but you can't write to that)
AddSelfMember	The entity can add or remove itself to the list of members
AdminSDHolderOverwriteACL	The entity will get it's ACL overwritten by the one on the AdminADHolder object periodically
AllExtendedRights	The entity has all extended rights on the object
CertificateEnroll	The entity is allowed to enroll into this certificate template. That does not mean it's published on a CA server where you're alloed to do enrollment though
ComputerAffectedByGPO	The computer object is potentially affected by this GPO. If filtering is in use there will be false positives
CreateAnyObject	Permission in ACL allows entity to create any kind of objects in the container
CreateComputer	Permission in ACL allows entity to create computer objects in the container
CreateGroup	Permission in ACL allows entity to create group objects in the container
CreateUser	Permission in ACL allows entity to create user objects in the container
DCReplicationGetChanges	You can sync non-confidential data from the DCs
DCReplicationSyncronize	You can trigger a sync between DCs
DCsync	If both Changes and ChangesAll is set, you can DCsync - so this flag is an AND or the two others
DeleteChildrenTarget	Permission in ACL allows entity to delete all children via the DELETE_CHILD permission on the parent
DeleteObject	Permission in ACL allows entity to delete any kind objects in the container
DSReplicationGetChangesAll	You can sync confidential data from the DCs (hashes!). Requires DCReplicationGetChanges!
GenericAll	The entity has GenericAll permissions on the object, which means more or less the same as "Owns"
GPOMachineConfigPartOfGPO	Experimental
GPOUserConfigPartOfGPO	Experimental
HasAutoAdminLogonCredentials	The object is set to auto login using the entitys credentials which is stored in plain text in the registry for any user to read
HasMSA
HasServiceAccountCredentials	The object uses the entitys credentials for a locally installed service, and can be extracted if you pwn the machine
HasSPN	The entity has a SPN, and can be kerberoasted by any authenticated user
HasSPNNoPreauth	The entity has a SPN, and can be kerberoasted by an unauthenticated user
LocalAdminRights	The entity has local administrative rights on the object. This is detected via GPOs or the collector module
LocalDCOMRights	The entity has the right to use DCOM against the object. This is detected via GPOs or the collector module
LocalRDPRights	The entity has the right to RDP to the object. This is detected via GPOs or the collector module. It doesn't mean you pwn the machine, but you can get a session and try to do PrivEsc
LocalSessionLastDay	The entity was seen having a session at least once within the last day
LocalSessionLastMonth	The entity was seen having a session at least once within the last month
LocalSessionLastWeek	The entity was seen having a session at least once within the last week
LocalSMSAdmins	The entity has the right to use SCCM Configuration Manager against the object. This is detected via the collector module. It does not mean that everyone are SCCM admins, but some are
MachineScript	Same as above, just as either a startup or shutdown script. Detected via GPOs
MemberOfGroup	The entity is a member of this group
Owns	The entity owns the object, and can do anything it wishes to it
ReadLAPSPassword	The entity is allowed to read the plaintext LAPS password in the mS-MCS-AdmPwd attribute
ReadMSAPassword	The entity is allowed to read the plaintext password in the object
ResetPassword	The ACL allows entity to forcibly reset the user account password without knowing the current password. This is noisy, and will alert at least the user, who then no longer can log in.
ScheduledTaskOnUNCPath	The object contains a scheduled task that sits on a UNC path. If you can control the UNC path you can control what gets executed
SIDHistoryEquality	The objects SID-History attribute points to this entity, making them equal from a permission point of view
TakeOwnership	The entity can make itself the owner
WriteAll	The entity is allowed all write operations
WriteAllowedToAct	The entity is allowed to write to the ms-DS-Allowed-To-Act-On-Behalf-Of-Other-Identity attribute of the object, so we can get it to accept impersonations what would otherwise not work
WriteAltSecurityIdentities	The entity is allowed to write to the Alt-Security-Identities attribute, so you can put your own certificate there and then authenticate as that user (via PKinit or similar) with this certificate
WriteAttributeSecurityGUID	The entity can write to the AttributeSecurityGUID. I'm not sure if this will work, but it has the potential to allows you to add an important attribute to a less important attribute set
WriteDACL	The entity can write to the DACL, effectively giving it all permissions after granting them
WriteExtendedAll	The entity is allowed to do all extended write operations
WriteKeyCredentialLink	The entity can write to the msDK-KeyCredentialLink attribute
WriteProfilePath	The entity can write to the user profile path of the user
WritePropertyAll	The entity can write to any property (same as above, ACL is just a bit different)
WriteScriptPath	The entity can write to the script path of the user, giving them instant remote execution when the user logs on
WriteSPN	The entity can freely write to the Service-Principal-Name attributes using SETSPN.EXE or similar tools. You can then kerberoast the account
WriteValidatedSPN	The entity can do validated writes to the Service-Principal-Name attributes using SETSPN.EXE or similar tools. You can then kerberoast the account

Plotting a path in the GUI

There is a right click menu on objects, so you can to searches in the displayed graph. First right click a target:

Then find a source to trace from:

If there's a connection from source to target, you'll get the entire attack path presented like this:

You can also pick any object on the graph, and perform an inbound or outbound search from it.

Current status

• A large AD with 500.000 objects results in a file approximately 250MB in size, but much larger ADs work fine too, just add more hardware
• Adalanche requires a reasonable amount of memory - loading and analyzing the above AD will use about 2.5GB RAM - but RAM is cheap, getting pwned is not
• There are probably mistakes, false positives and stuff I've overlooked. Feedback is welcome!
• There is an unsolved challenge with services that require multiple ACLs to pass (for instance Cert servers only lets members of "Users that can enroll" group use enrollment, while the Certificate Template lets "Domain Users" enroll - this looks like "Domain Users" can enroll to Adalanche). The same problem arises with fileshares, so this analysis is not done yet.

Further reading on Active Directory attacks

If you need inspiration on how to use a detected attack path I can highly recommend that you take a look at both the PayloadsAllTheThings Active Directory and HackTricks Active Directory Methodology sites.

Commercial Editions

Commercial editions with improved functionality are available for purchase from NetSection. This is what funds the open source edition.

Happy hunting!

Feedback is welcome -> Mastodon @lkarlslund / Twitter @lkarlslund / LinkedIn Lars Karlslund