This is a library for our Monochrome OLEDs based on SSD1306 drivers
Pick one up today in the adafruit shop! ------> http://www.adafruit.com/category/63_98
These displays use I2C or SPI to communicate, 2 to 5 pins are required to interface.
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries, with contributions from the open source community. Scrolling code contributed by Michael Gregg. Dynamic buffer allocation based on work by Andrew Canaday. BSD license, check license.txt for more information. All text above must be included in any redistribution
Preferred installation method is to use the Arduino IDE Library Manager. To download the source from Github instead, click "Clone or download" above, then "Download ZIP." After uncompressing, rename the resulting folder Adafruit_SSD1306. Check that the Adafruit_SSD1306 folder contains Adafruit_SSD1306.cpp and Adafruit_SSD1306.h.
You will also have to install the Adafruit GFX library which provides graphics primitves such as lines, circles, text, etc. This also can be found in the Arduino Library Manager, or you can get the source from https://github.com/adafruit/Adafruit-GFX-Library
Pull Request: (November 2021)
SSD1306_NO_SPLASH to opt-out of including splash images in
PROGMEM and drawing to display during
Pull Request: (September 2019)
Version 1.2 (November 2018) introduces some significant changes:
|Change OLED_RESET to different pin if using default I2C pins D4/D5.
|No hardware SPI - bitbang only